Aerosol Can Not Spraying? Here's How to Fix It

16 Apr 2024
us
Emil

We've all been there – you're ready to tackle a project, grab your trusty can of spray paint, hairspray, or cooking oil, and… nothing. The aerosol can simply refuses to cooperate. Before you toss it in frustration (and potentially make a mess), let's explore why this happens and how you can get that precious spray flowing again.

Aerosol cans are marvels of engineering, utilizing a pressurized system to deliver a fine mist of product. But like any complex system, things can go wrong. The most common culprit is a simple clog, often in the nozzle or dip tube. This can happen due to dried product, improper storage, or even just bad luck. But fear not – in many cases, a clogged aerosol can can be salvaged with a few simple tricks.

Understanding the anatomy of an aerosol can can be helpful. Inside the can, a liquid product is mixed with a propellant under pressure. When you press the button, this pressure forces the product up a dip tube and out the nozzle, atomizing it into a fine spray. Anything that blocks this flow – from dried product to a misplaced dip tube – will prevent the can from spraying properly.

So, what can you do when faced with an aerosol can on strike? Start by checking for the obvious: Is the can actually full? It might sound silly, but sometimes we misjudge the weight of a can and assume it’s empty when it’s not. Next, take a close look at the nozzle. If you see visible debris, try cleaning it with a pin or a toothpick. You can also try running the nozzle under hot water for a few minutes to soften any dried product.

If the nozzle appears clear but the can still won’t spray, the problem might be further up in the dip tube. In this case, try shaking the can vigorously for a good minute or two. This can help to dislodge any blockages and mix the product with the propellant. Sometimes, simply changing the angle of the can while spraying can also help to redirect the flow and get things moving.

Troubleshooting an Aerosol Can

Still no luck? Here are some additional things you can try:

Warm the can: If the product inside is thick or viscous, try warming the can in a bowl of hot (not boiling) water for a few minutes. This can help to thin the product and make it easier to spray.
Use a lubricant: Apply a small amount of WD-40 or another lubricant to the nozzle and valve stem. This can help to loosen any stuck parts and get things moving again.
Replace the nozzle: If you have another aerosol can with a similar nozzle size, you can try swapping the nozzles. Sometimes, a faulty nozzle is simply beyond repair and needs to be replaced.

When to Toss the Can

While it’s tempting to try and salvage every last drop, there are times when it’s simply safer to discard a malfunctioning aerosol can. If you’ve tried all the troubleshooting steps and the can still won’t spray, or if you notice any signs of damage to the can itself (such as rust, dents, or leaks), it’s time to throw in the towel (figuratively, of course). Dispose of the can properly according to your local regulations, as aerosol cans are considered hazardous waste.

Aerosol cans are incredibly useful tools for a wide range of applications, but they can be finicky at times. By understanding how they work and following these simple troubleshooting tips, you can extend the life of your aerosol cans and minimize frustration. Remember to always use caution when handling aerosol cans, and prioritize safety first. And hey, if all else fails, there’s no shame in calling in a professional!